Anything that you can think of that be can a help for the highest ethics, gentleness, honesty, fair dealing, joy, all wonderful positive attributes that can be broadcasted with a stone, with a crystal (asking it to do that), or writing on paper (intents), you can put in the Plasterite, but know that you will be broadcasting sometime very far, and you must be certain that what you put in the Plasterite as well as the Orgonite, is exactly what you want Here is another most powerful thing you can do, this was given to me by my friend Tony, a very enlighten being; wrap your Plasterite with a long electric cord, plug it, then put both hands on the wire coiled and pray, intent with as much feeling as you can.......... About the "living" being, well yes the Plasterite is a living being, very feminine in nature, it is not a lump of inanimate mater, you can go in and speak with her and ask what she like, she knows exactly what she want and will guide you if you ask.....a beautiful being. All of us must see the level where we are working, and it is there that the changes are the most effective Something that I have been doing with success: rather than using the crystals per say, I take all the crystals that I think can broadcast the appropriate characters, and I put them all in "pillowed " water, I live them in the sun all the time and when I make the Plasterite , I take 1/4 cup of that water and put it in the plaster water, this gives me an homeopathic kind of mixture stronger than the stones that I could put in it (just take a 1/2 gallon water jar, put your stones in it, and live them in the sun, they would likely be ready to use after one single afternoon in the sun, but I live them out all the time. The pipe stone is truly from the blood of our ancestors from a long time ago, it is a long story, yes it is sacred, but I would not put it in to be broadcasted , Tocsa Josh
I hear what you're saying, Josh ... and thank you ... intent, prayer and all that good stuff is what it's really made of .... and I pump them with good vibes when I've finished pouring .... it's all that's needed, other than the basic materials ... now that I know what plasterite needs, and what orgonite needs .. I have always preferred to keep things simple, and have a golden rule ... when in doubt, don't ... well, that's one of them ... a few days ago I looked at the stone I have, and it wasn't 'talking' to me, so I haven't used it .. and it sounds like you wouldn't include it in your pillowed water ... you're making a gem essence there, by the way .. but you probably knew that .. I am looking forward to the plasterite, and will do as Tony suggested ... I hadn't really understood the reason for cord-wrapping before, but now I do ... I can be a bit slow sometimes, but I get there eventually!
Great techniques Josh. I,m going to 'pick' a few stones to charge up water. Should have done it ages ago. Water loves taking on energy....Biggest crime using water towers as M/wave transmiters, gift them. ! Sacred... the coil or extension cord wrapped around the plasterite is to broadcast pos energy to electricity grid, It's plugged in to something that runs 24/7. That idea of Tony is brilliant...for implanting intention and grattitude for its use. Very interesting using the coil. I like the idea of stirring / vortexing the water while pillow the sides . Same with making beer..ha ha Also, a good tip for plasterite...after its hardened, but still soft, take a nail file or similar and run around the edge of mould a few times. This will give the base a slight brevelled edge which will stop pieces chipping off. Wish I;d done that with the first large cones I made.....even small pieces, just neatens it up. Thanks Josh...what productive play and fun we have ,.....
I've made a teacup size that cracked across the bottom ... I thought maybe the quartz in the middle was too big ... I've got a batch setting now, and have re-dipped the cracked one (hope it stays together), but another new one has cracked across the bottom, and the quartz in that wouldn't have been a problem ... I waxed the mould well ..... they're sitting in the sun .... could that be heating the resin up too quickly?
So, you could see the crack while still in the mould ie on the top as it hardened ? This is common when the resin hardens too quickly...too hot, If so, just use a fraction less hardener. Temperature, hot day, cold day can make diff to amount of hardener too. Less hot , more cold ,,,Keep a mental record ..or written ,, Ive had heaps of cracks, fractures. Not a problem...Orgonite still works ok, but can be repaired if desired. Its all trial and error... just repeat what works And have fun
yes ... the one that I re-dipped didn't re-crack but another new one did .... I waxed the mould really well, but it was a plastic martini glass that was thick and had a white plastic lining that seemed to love to stick to the resin! now it's stuck in the mould ... I've chipped the edges of the mould off, and still can't get the orgonite out, so have decided to file the edges down and use it as a garden piece .... kinda a pity 'cause I put some you beaut crystals in there and was really looking forward to seeing what it came out like ....monsoon gecko wrote:So, you could see the crack while still in the mould ie on the top as it hardened ?
I normally don't put them out in the sun, but did, and had used less hardener ... maybe I was a tad impatient about it setting? and it got pretty hot here yesterday ... the thought crossed my mind that it could be heating up too much .... will find a shadier place today ...monsoon gecko wrote:Temperature, hot day, cold day can make diff to amount of hardener too.
yes, Teach! I used glass moulds for the first time yesterday ... the orgonite came out so easily! I also used paramagnetic rocks in one in particular, and the energy from it is awesome! yes, it's a very pretty pink and black colour when in the resin ... I'm having lots of fun ...monsoon gecko wrote:Keep a mental record ..or written