Plasterite * Selenite * Gypsum * Plaster of Paris * Chi * Prana by Jacques 2

by **monsoon gecko** on Sat Jun 05, 2010 10:14 pm

Yo Josh….what a buzz. ! A new technique that works…in fact PUMPS. !
Got plastered and made 3 Hhg’s yesterday.
One in s/steel pyramid, large glass martini and cylinder plastic takeaway away container.
It was quite a wet mix…crystals sank to bottom…even thought it wouldn’t harden…..poured
off half cm of water that accumulated on top of moulds during hardening.
Sprayed silicon release in the pyramid and martini…all came out smoothly.Poured into another
glass and a ceramic bowl with no release agent <and no crystals ><made too much plaster > and
they came out perfectly too. <will make great pavement chalk at school Ha. >The important thing here is , I can use all of my normal moulds safely…glass, silicone and s/steel !
Even the giant glass vase for a plaster Broadcaster.!I must share with you my energy sensitivity…Right fom the very first Tb;s , I could feel the orgone
field. My best desciption is like a spiritual pressure to my forehead…third eye ?
I have made many devices since and each new one takes some getting used too. eg. Cb’s ,standard
and induction type..114 and underground cloud buster UCB , peacemaker PM. The last 3, I discovered on
Etheric Research Forum. I couldn’t go near the 114 for a couple of days….even brought first helicopter. !
Next was the Broadcaster and now Plaster Orgonite…I can’t believe the energy given off by these
plaster Hhg’s….very powerful orgone field…and I can make them anywhere ,anytime.

by **monsoon gecko** on Sat Jun 05, 2010 10:44 pm

continued..

I used quite a few crystals and minerals…most from previous ebay purchases., mainly strung chip beads.
The list includes : lapis lazuli. sodalite, tourmaline, kyanite, ruby chips, mica flakes, tiger eye, amethyst,
rose quartz .garnet, sugalite, hematite, forrest agate, and turquoise. Also , included was a chunky 1 inch +
smokey lemurian quartz point.

I have spent half a day hammering the rest of my stones.< of course I’ve Kept a few. >. This is for two reasons.
1. Apparently. smaller pieces and powdered work better . so now largest broken pieces 5mm.
2. I’ll be making Hhg’s with school students this week in my favourite teacup size glass moulds..actually old punchbowl set !
I want to preserve my resources. I know what kids are like…they’ll want to use more than is necessary. so this way they are limited to a pinch or two of each sample…..unbelieveable…I’m actually looking forward to going to work..Ha ha ha .

Well the spiritual pressure is still there today, though not as intense…guess I’m getting used to this strong new orgone field ! !

Thankyou Josh for sharing this new technique……OUTSTANDING !

by **monsoon gecko** on Sat Jun 05, 2010 10:48 pm

Oh , forgot to use copper powder…must remember to take to school….even stronger ? Ha..should be interesting !

by **josh** on Sun Jun 06, 2010 6:37 am

Thank you Monsoon, this is a wonderful report, it will be interesting to see what the children will do, let us hope many people pick up on the idea of making cheap, easy and powerful Orgonite

by **josh** on Sun Jun 06, 2010 7:01 am

I am getting ready to make a cloud booster using a single 4 inch copper pipe in the middle, I will have to keep it under cover, though shellac woks nice on the plaster, I dont think it will work for too long in the elements
J

by **nepipemi** on Sun Jun 06, 2010 1:34 pm

Oh god, this is awesome, MG! Thanks for the write up.

Regarding your sensitivity, have you ever made or been around sugar orgonite? What does it feel like comparatively?

Also, Josh, I know might defeat a couple purposes of the plaster method, but what about coating the outside of the plaster CB with resin or epoxy to weatherproof it?

Nepi

by **josh** on Sun Jun 06, 2010 4:20 pm

I shall try a coat of epoxy and see what happen
j

by **monsoon gecko** on Sun Jun 06, 2010 7:02 pm

Hi Nepipemi…Never considered sugar orgonite,,,have read about it couple of times ,but info wasn’t clear,
on construction and methods….closest I’ve been was munching on a toffee apple ! Ha haI have some brown and black oxides buried away somewhere from old pottery days…..these were used to paint,
colour, patterns on unfired pottery pieces….I’ll take to school so kids can decorate there plaster Hhg’s…should
look great and add their own personal touch.Shellac….natural substance ? From memory I used this to French polish a wooden jewelery box at school. Came out with glass
finish..got an A…but that was 40 odd years ago. Is this the stuff that comes in flakes and you dissolve with something ?
Can,t remember . How many coats? Also , how long after making does plaster take to be dry enough to shellac ?
The paper my Hhg’s are sitting on still seems damp. I have 2 days with students so looks like not enough time to dry,
paint and shellac .

More info appreciated… Thanks

by **josh** on Sun Jun 06, 2010 8:36 pm

Hello MG
The shellac drys in a minute, the first coat will disappear quickly in the dried plaster, and to see the shine you will have to coat it about thee times.The shellac is natural, it is made with bugs

, I like it since it dry so fast, it will come in different weight, called 30 lb or 40 lb cut, and this has to do with the amount of dissolved bug material in a solvent, I have not seen it in powder form to be dissolved, all I can get is the already prepared mixture.So You should be able to get the children to use it, also if it is hot where you are, by the time you finish the second side of your HHG, the first one will be dry, so basically you can shellac the whole device and keep on going for a second coat without stoping.
I am most interested in what the children will say

IMPORTANT: after you use brushes with shellac, it will clean spotless with ammonia, even if you forget a brush and do it the day after
josh

by **josh** on Sun Jun 06, 2010 8:57 pm

Forgot; depending on the size of your plaster pieces the drying time will vary , some of the larger one : cone 8 inches in bottom 3 inches at the top and 18 inches tall will take a week to dry before shellac, an HHG may take a day or two depending how hot the environement. this may be the only draw back with the plaster, you can demold them rather quickly (much quicker than resin), but it will stay moist for a while, but the results in the quality of the energies is worth the wait

by **monsoon gecko** on Tue Jun 08, 2010 7:59 am

Thanks for info Josh,
Picked up some orange shellac flakes and mineral turpentine < I think..left at school >..has
instructions,,,will find out tomorrow.Today was great. Students responsive. They are quite energy sensitive having played with
quartz, tourmaline and shiva stones etc….can operate pendulum and divine water…I gifted them
pocket orgonites last Christmas.
So we’re going to make plaster orgonite today……eyes lit up . ha
.ground rules set , each student collected 3 pieces each
of 19 samples in takeaway containers , plus a small hermiker quartz.
The Hhg moulds are teacup size ,old solid glass…a couple of old punchbowl sets.
The extras from previous list were : shungite, adventurine, quartz chips , red coral and
I remembered the copper powder..each batch of plaster had t/spoon .So after a demo, students made and mainly poured their own in groups of 4. Had to help
couple of times…..They came out very smooth and students reported feeling energy while holding.
Painting tomorrow…Should be interesting.. might try some diff, moulds.
S
Don’t think will be dry enough to shellac,..we’ll see.

by **monsoon gecko** on Wed Jun 09, 2010 7:49 pm

So.. arrive at school next day..staff seem happy as usual,
but noted higher energy…the students were zooming around
playing happily together….not your normal layed back, slow
start morning !
Class work surprised me as All students participated with
enthusiasm. The day flew past and they went home smiling and
chatting…. WOW..impressive.
This was a real eye opener…..the school is already well gifted
with Tb’s in classrooms, office and buried in gardens…..but
today there was a much higher energy factor that stood out.The PlasterOrgonite was still damp a day later,,we played with
them for a while…most confirmed feeling energy while held..
couple didn’t.. I demonstrated oxide painting…tricky and fiddley.
No room for error as oxide soaked in straight away and smudged
on touch….the shellac flakes refused to dissolve. metho, not turps..!
So we made more plaster orgonite.! ! ha haIn fact, I really wanted to trial my silicone moulds…trays of flat top
pyramids, hearts and stars.Tb size. Students loved collecting the samples
again and proficiantly made and poured the plaster with the small
amount of copper powder.
They came out beautifully….smooth as..with a hint of coloured
minerals showing through.
So school holidays coming up.. won’t see them till next term.

I wonder if their homes will glow as much as the school did ?

Next trial…a large Plaster Broadcaster…..no bucket of water.!
Enjoy.

by **monsoon gecko** on Fri Jun 11, 2010 2:36 am

Here,s some photos…..if they come out !!

http://s814.photobucket.com/albums/zz63 … %20Trials/

by **josh** on Fri Jun 11, 2010 9:51 am

Hey MG, this is good, how do you manage teaching about Orgonite in a school, I thought for sure this would never be allowed, this is wonderful indeed, those kids will never forget.
I wanted to share something here for experiment: On a long extension cord, put and wrap a device at the beginning of the electric cord and 10 or 15 feet further do the same,
So you will have on the same cord TWO devices 10 to 15 feet ( 3 1/2 to 4 meters) apart, I have been doing that and I think it is more effective in broadcasting.
Plaster or resin no matermale plug_________X__________________________________X__________female side
——————– device———–10/15 feet—————–device
This is the one-two punch

Josh

by **nepipemi** on Fri Jun 11, 2010 10:07 am

Josh,
next you will be wanting us to make a flexible rubber orgonite paint to coat the entirety of the electric cord!Hey, wait a minute! :idea:

Does silicone qualify as a chemically organic substance?

by **josh** on Fri Jun 11, 2010 2:49 pm

Hummmmm, now that you mention it……

by **monsoon gecko** on Sat Jun 12, 2010 10:40 pm

Plaster Orgonite Broadcaster

Here.s my photobucket essay….Enjoy
Oh…do I need as much quartz as in resin model ?
My guess is……can’t hurt…especially considering this size.
Comments appreciated.

http://s814.photobucket.com/albums/zz63 … r%20Trial/

by **josh** on Mon Jun 14, 2010 2:38 pm

MG I think you need as much ‘crystal powder’ for the plaster, I know That is what I do and it seems to work well.

Here a few more pictures
Here is ‘cake’

Here is a large cone HHG

Here is the table center piece, two cake model

More coming soon
j

by **josh** on Wed Jun 16, 2010 9:28 pm

Alright people, this is the translated link from the German to English, about the gentleman making Plaster “orgonite”

http://babelfish.yahoo.com/translate_ur … =Translate

by **Spirit Walker** on Sat Jun 19, 2010 11:51 pm

Aho Brother Josh!! Thank you for guiding me to this new matrix for the creation of energy toys! After viewing the German website, I instantly fell in love with the energy they were producing.

Today after running around with kids, I finally checked sources for plaster, found my Home Depot had a 20lb bag for 16 bucks, so bought that a some shellac to finish with when dried. I think I messed up on the first one, the glass I used appeared to be cylindrical, but now I’m thinking the lip slightly curves in, so will see soon! LOL Worse case I brake this glass to get it out. I did spray and smear Pam on inside of glass prior to pouring in mix.

I made more mix than needed, so scrambled and filled a large coffee mug and finally a paper cup, 4oz I think. That last I took one of my oldest muffins and filled bottom of cup first, slide muffin in and pressed down until it surged up and over it, then filled more till ran out.

I got creative on the mix itself. The plaster got mixed with some red pepper and lots of cinnamon, with a dash of garlic. Also one cap full of crushed/powder mixed crystals. Water came from charged water reservoir I have accumulated from various forms of natural water charging, and one mixed with plaster, I discovered I put too much water in… OOPS. Was way to watery. Threw in pinch of magnesium oil and stirred, added more fresh plaster and stirred, after pouring into mold and adding variety of small gems, garnet, green adventurine, and peridot, with quartz crystal (4) surrounding a cut bamboo length in middle. Added more plaster to cover top of bamboo, then added more of the above gems, then covered them with more plaster.

I put in front of my room air cleaner that has a Himalayan Salt Crystal Lamp on top, and produces it’s own ion mix to clean the air, so as they sat in front of that, the last ingredient was a few drops to each of Nag Champa oil. Yum!

They appear to all be dry, will wait till tomorrow to see about removing one. Room smells great. One in glass appears to have a mocha color to it, very nice.

I got a lot more plaster and water out the wha zoo, so my father’s day gift will be making some with kids tomorrow afternoon. I’m going to pull out the brass heart and use that! Maybe the big dolphin for myself…

Aho!

Tony

by **josh** on Sun Jun 20, 2010 10:34 am

Thank you Tony
This is quite a mix a look like a recipe for something to eat, it reminded me that in the early days of Orgonite Don Croft would put hot pepper in his Orgonite, so as a good follower I did as well, he may still do it for all I know.
Yesterday I also poured three devices, one of them is a safety street cone (big red thing) and this took one 25 lb bags, and also two very beautiful large and tall glass vases, both of them were filled with cracks within minutes of filling with the Plaster, I do not know why, may be very cheap glass, anyway both also took one 25 lb bags, I de molded the rubber cone late last night, and I will do the glass in the next hour
I shall take pictures and post

by **josh** on Sun Jun 20, 2010 7:33 pm

Here are some new pictures of yesterday’s pouring of cones and some other older ” creations” :lol:

The large cones are 27″ tall

by **orgone donor** on Mon Jun 21, 2010 5:51 am

All the plaster pics look really great. Am going to try some plaster orgone when my crystals arrive. (also the plaster appeals more to my budget !!)

Question: will painting the plaster piece have an effect on the energy? I was thinking they would look really cool painted with sparkly rainbow coloured paints, but if the energy is optimal without paint, I will leave them be.

Also, do you still put in main quartz like with resin orgonite, with the positive terminated end pointing upwards?

One more: I don’t have any copper powder yet, would it be okay to mix in some fine bronze shavings in the plaster mix instead? .

PS. My first ever resin orgonite TBs are curing right now. the journey has begun.

by **monsoon gecko** on Mon Jun 21, 2010 9:28 am

Good one Orgone Donor….that’s excellent news, just keep making more….you’ll
be surprised at how quickly they get used up gifting…friends , places , towers,
swarf suppiers, lecturers….ha, ha ..etc.
Questions,,,not sure.. I like an upright quartz in the middle, but at school, kids just
throw in a little hermiker…still seems to work ok.
Apparently , works without metal powder too…will leave those up to Josh to answer.Let the gifting begin….enjoy !

by **josh** on Mon Jun 21, 2010 12:45 pm

Here are the photographic results of the Ice Test with Plasterite after 12 hours in the freezer last night as well as pictures of frozen water in control jar without Plasterite

The ice cone formation is obvious….as well as the tip rising on top…..with the Plasterite covered jar

Ordinary ” landscape” of frozen water in the control jar after 12 hours in the freezer…..

by **josh** on Mon Jun 21, 2010 1:13 pm

The plasterite that I make will not stay as shown my lady has already decided to paint them and have landscape pictures on them so yes paint them how ever you want, but no metallic paint.
AS far as the metal when I use some in it is a small amount such as a pinch of copper powder for a gallon volume, but lately I have not put any to see what would happen.
There is something of worth that was told me by Spirit Walker, if we can verify this it would show why Plasterite is working; what he said was that we probably have a gazillion microscopic air bubbles in the Plasterite, and that would translate into an infinite amount of resonant cavities :shock:

That is big, we shall see, I will have to break a piece and look with a microscope, I think I have one that I can hook up to my computer, given to me by a long ago friend
As soon as we have painted pieces I shall post them

by **Spirit Walker** on Fri Jun 25, 2010 10:12 am

I’ve now got about 10 pieces made from the plaster, and OH MY GOD, I love them!!!!! I was handling my 1st attempt last night to check on the shellac job I did on it the night before (needs more, sucked it right into the plaster, can’t even tell there is shellac on it!), and just holding it and feeling it’s energy, I burst out giggling! LOL A very high, joyous energy is coming out of that little puppy!!! By palming (meaning using my palm as a sensor to measure the energy output), I could define a field extending almost 12 feet from it, and this piece was made in a small glass tumbler, so it is not big. The more I became sensitized to the energy, the more uplifted I felt from being inundated with it!!

Still lots of playing to do this weekend with making more, the pieces my kids made came out fantastic as well, especially the large dolphin mold that my daughter used!!! She has some paint to decorate it as well, and is planning on many more pieces now. The blessing for me in this is that my daughter has been challenged with serious emotional issues over the last few years, and seeing her respond to the energy these creations produce is very heart warming and encouraging to me as her father. I truly believe that LOVE can manifest in a myriad of ways, and that working with these diverse elements to create/attract/broadcast Life Force Energy is a sacred and joyous undertaking.

AHO!!

Tony

by **josh** on Fri Jun 25, 2010 9:10 pm

This Plasterite cone got the ” treatment” from my lady

by **Steve** on Fri Jun 25, 2010 10:09 pm

Wow! That piece should be in an art gallery. Nice Work!

Steve

by **josh** on Fri Jun 25, 2010 11:18 pm

That piece is 18″ tall and sings very nicely, next come the 27″ will shall see what she will do with it, Steve this is so easy make some and see how it feel, guaranty you will like it…..and the way it broadcast

josh

by **Spirit Walker** on Sat Jun 26, 2010 12:17 am

That is without a doubt, the most beautiful life force energy harmonizing art piece I have ever seen!!!! WOW!!!! Incredible, truly! I love it! Please ask the dear Lady to make many more!!!! You must go buy much more plaster and paint for her!!!! I am looking for bigger mold later this day, and will buy more plaster and paint too! That piece just sings love, peace, tranquility, and joy, in so many direct and indirect ways. I could just stare at it for hours….

Tony

by **josh** on Sat Jun 26, 2010 9:20 am

The mold come from Michael the art store, i think it was about $20
j

by **monsoon gecko** on Sat Jun 26, 2010 4:49 pm

Great piece, love the earth ,ocean ,sky balance. Great colours. Did the paint soak in like shellac
and what sort of paint to use ? Surely you can’t wrap power cord now and cover over now !
Very interested to know what sort of Bovis reading for a piece this size. Painted ……and wrapped
in power cord.
Keep ’em coming….want to see the next one ..ha

by **josh** on Sat Jun 26, 2010 9:46 pm

Hi MG, this is the ” painter” of the cone

I used non metallic acrylic paint as well as pigments and mica in glue for shine and interesting effects…No it did not sink in the plaster but stayed on the surface. This piece is to ” sing” by itself, because of the colours….no need for an electric cord.

We have a cone of 27″ wrapped with a long cord (20 times). It seems that colouring the pieces gives it a boost because colours have their own frequencies that add up to the plaster and whatever is in there with it.
So if you and/or your students will paint their Plasterite pieces, see/feel what will happen

. Have fun and I will post the other sides of that cone and other pieces soon.OK my turn… Aright Steve give us a Bovis reading, I promise I will not ban you for that

, My lady has gotten the ‘bug’ for the Plasterite and the decorating, so today we got bunches of molds and 75 pound of plaster :roll:

, I know what I will be doing tomorrow ha ha
josh

by **Steve** on Sat Jun 26, 2010 9:57 pm

I’m getting 324,000 on this one Josh. Even more important than the Bovis energy, the frequency of this one is very high. Can you feel the field of this piece reaching out? I get about 17ft or so.

Blessings
Steve

by **josh** on Sat Jun 26, 2010 10:35 pm

Thank you Steve, when are you going to make your own

here are the rest of the cone faces

by **nepipemi** on Sat Jun 26, 2010 10:45 pm

:shock: holy cow! That is BEAUTIFUL! NICE, NICE, NICE!

by **sacred** on Sat Jun 26, 2010 10:51 pm

awesome!

by **monsoon gecko** on Sun Jun 27, 2010 8:19 am

Awsome alright ! The land section I find mesmurising , great pattern of warm colours.
Looks great from all directions….
Wow… that Bovis reading puts it higher than a nano power wand and a bit over a CB..
very encouraging…….. That means my large pieces must kick ass too…within reason.
So , by adding power cord wrapping,,,say 7 or more turns , the Bovis reading would jump ?
Correct ? Esp. with its function on the power grid ?Thanks guys for input.. Just putting 2 + 2 together,Bring on next one !

by **josh** on Sun Jun 27, 2010 1:28 pm

Steve can you answer MG’ s question?? This is a powered plasterite cone, the mass of which is about 3 times the painted cone….
See what you get. Thankshttp://i986.photobucket.com/albums/ae347/Garrigues/002-1.jpg[/IMG

Leave a Comment Cancel reply