Kirlian photography of aluminium orgonite (courtesy of www.orgonecrystals.com)

The Kirlian photo above shows the radiant aura of a pendant with aluminium orgonite. Aluminium in orgonite has some distinct advantages:

• The filings are much thinner than those normally produced with iron or copper. That results in a finer alternative layering of metal and resin, making the DOR to OR conversion more powerful.
• At the shearing surfaces (where it has been shaved off), aluminium develops minute micro crystals that add power to the orgonite.
• The devices are lighter, hence lower shipping cost
• Easy to get and relatively cheap (that would also be true for iron filings but they are normally quite clunky)

Of course, all metals have different energy signatures. It would be naive to deny that. Everything has an energy signature. There is no dead matter. That’s now pretty much common knowledge. On a certain level all matter is consciousness, right? So even a rock has/is consciousness. But this does not mean that aluminium is “negative” or copper or gold is “positive”. Just like the addition of healing gemstones adds colour and rich overtones to the basically always positive etheric vibration of any orgonite, using different metals can enhance certain healing aspects of the orgonite. This is happening on a more subtle level than the actual “raw” energy conversion from DOR to POR which is nothing else but removing a blockage and getting stagnant Chi to flow again.

The way I understand it is that there are finer and finer levels of perception. Our conventional 3D reality is the coarsest. The level of “Orgone Energy” is almost protophysical, it visually affects clouds and has other very easily observable physical effects. Gemstones and other additions to orgonite – also when used on their own – work on a much finer vibratory level. For this reason we add copper, gold and silver to personal healing tools in order to bring in these finer healing vibrations where it’s appropriate.

The beeswax deception

Another well known stream of disinformation is the “beeswax dis-info” whereby beeswax is promoted as a more sympathetic replacement of synthetic resins in making orgonite. MAke no mistake: Beeswax is of course a lovely material of a nice and positive energy signature. But just like lovely scented woods or of beautiful gemstones on their own don’t show the powerful characteristics of orgonite, beeswax has been found to be much less effective in the orgonite mix.  Furthermore it is totally unsuitable for environmental gifting because it will melt and disintegrate under real life weather conditions. No harm done if you want to make a “beeswax orgonite” piece for your personal indoor space.

It’ll even work as a weak orgone generator and may just feel good to have around and nice to look at. But is that what orgonite is really about? Orgonite in the strict sense is the matrix of resin and metal filings, most often aluminium, and some quartz crystals. This material mix has been found and demonstrated to effect some unique and wonderful things. I think that our expedition reports provide ample demonstration for the efficacy of this simple but oh so effective mix.

Plasterite – the new Orgonite?

One of the latest fads in this line of deceptions is called “plasterite“. Basically it’s “plaster of Paris” or simply gypsum with crushed quartz crystal. Here is a depiction of a (quite nice looking) piece of “plasterite“:

To make a longs story short: Plasterite has nothing to do with orgonite at all. It’s just gypsum with some crystals. Any perceived healing effect would be from the crystals added to the gypsum and that would be on a weak and very subtle level. The Kirlian photo above speaks a very clear language in that respect, I think.